- Information
- Key spec
- Comparison
- Accessories
Martindale’s FD650 Professional Circuit Breaker and Fuse Finder makes identifying poorly labelled fuses and breakers easy without the need to power down each circuit. This comprehensive professional Kit expands the capabilities of the standard FD550 so that it can also be used on light fittings or other points in a circuit in addition to 13A sockets.
The receiver has both fast manual mode and auto–threshold mode. The auto mode sets the sensitivity to ignore weaker signals, which can be caused by coupling between circuits, ensuring easy detection in a wide range of installations.
The receiver will work with multiple transmitters and can also be used as a non-contact voltage indicator.
The kit includes a twin lead set with crocodile clips (TL83), IEC mains lead (EX332) and a soft carry case.
Easy location of fuses and breakers
Trace from light fittings
Audible & visual indication
CAT III 300V transmitter, CAT IV 600V receiver
FD600 Transmitter Voltage rating
230V
Frequency range
30-70Hz
IP rating
IP20
Supply
from mains
FD650 Receiver Tracing depth for fuse assignment
0-10cm approx. depending on local conditions
Sensitivity setting
via digital stepping
Supply
9V battery, MN1604/PP3, IEC 6LA61 (alkaline only)
Dimensions
202 x 32 x 22mm
Complies with
EMC standards Transmitter: CAT III 300V Receiver: CAT IV 600V
FD650 includes
FD650/R receiver FD500/T transmitter FD600/T multi-purpose transmitter IEC 13A mains lead adaptor TL83 2 wire fused leads with IEC connector TC57 carry case Battery
Warranty
2 Years
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162183713
Introducing the NEW IN2203 Advanced Insulation Tester
Martindale’s IN2203 is the ideal solution for both installation and service applications, combining a wide range of insulation test functions with basic electrical measurement capability in a single compact device.
Learn more
Reliable, fast and accurate calibration
Martindale Electric’s calibration service gives you a reliable service and fast turnaround. Most instruments are calibrated in-house and ready within 3 – 5 days.
Find out moreThe ET6000 series multifunction testers
Check out the ET6000 Series Multifunction testers, the ideal solution for 18th edition testing. From the basic ET6000 to the ET6500 with EV capability, a solution to suit all budgets and testing requirements.
Learn more
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields