- Information
- Key spec
- Comparison
- Accessories
The Martindale CP201-32A is a socket tester for industrial single-phase sockets identifying up to 28 fault conditions.
It features a simple user interface for intuitive interpretation of results. Wiring faults are instantly indicated by the three bright LEDs mirroring the layout of the pins in the plug. There is a look-up chart on the tester to aid quick diagnosis of common faults.
In addition the CP201-32 indicates if high or low voltage levels are present at the outlet.
The unit is fitted with a 230V 32A plug to BS EN IEC 60309-1.
Industrial socket tester
Three bright LEDs with simple fault codes
Excellent durability
For use on 230V 32A sockets
Nominal operating voltage
230V AC rms
Operating frequency
50Hz
Power
From socket under test
Power consumption
<2.5W
Overvoltage
CAT III 300V
Temperature range
-10 to 40°C at max. 85% RH
Open Earth
If earth resistance >50kΩ nom at 230VAC nom
Safety confirms to
BS EN 61010-1, CAT III 300V, Class II, double insulation
Dimensions
91(L) x 80(W) x 38(D)mm
Weight
195g
Warranty
2 Years
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162187759
The all-new BZ820-EV for EV socket testing
The optimum first-line tool for checking EV chargers fitted with Type-2 connectors.
Discover the BZ820-EVNot all socket testers are the same
Martindale’s extensive range of socket testers not only performs the standard functionality tests on an outlet, some can also check the mains level, check for supply Line-Neutral reversal and perform a non-trip earth loop test!
Learn more about Socket testing
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields