- Information
- Key spec
- Comparison
- Accessories
A unique insulation clamp meter for the installation, testing and maintenance of domestic and industrial installations. This high-specification clamp meter can perform insulation tests to 6G Ohms with 5 test voltages from 50V to 1000V.
The clamp provides True RMS measurement of AC current to 1500A and AC voltage to 750V. It will also measure DC current to 2000A and DC voltage to 1000V. The CMi210 has all the same test functions you would expect to find on a high-specification multimeter with the added benefit of temperature measurement.
True RMS Measurement
Insulation resistance test
Duty Cycle and Diode test
CAT IV 600V safety rating
Current AC
True RMS 0.1A to 1500A (2 ranges)
Current DC
0.1A to 2000A (2 ranges)
Voltage AC
True RMS 0.001V to 750V, autoranging
Voltage DC
0.001V to 1000V autoranging (5 ranges)
Insulation resistance
300kΩ-6GΩ depending on voltage test
Capacitance
0.001µF to 6.6mF (4 ranges)
Frequency
0.01Hz to 10MHz (7 ranges)
Resistance ranges
600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Temperature
-50°C to 1300°C (-58°F to 2372°F) K-type probes
Includes
Batteries, case, TL45 test leads, type K thermocouple and manual
Warranty
2 Years
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162186592
| CM95 | CM100 | CMi210 | |
|---|---|---|---|
| AC Current | ✔ | ✔ | ✔ |
| DC Current | ✔ | ||
| AC/DC Volts | ✔ | ||
| Ohms | ✔ | ||
| Frequency | ✔ | ||
| Capacitance | ✔ | ||
| Non-contact Voltage Detector | |||
| Auto ranging | ✔ | ||
| Max Conductor Size | 85mm Ø | 160mm Ø | 55mm Ø 70x18mm |
| True RMS | ✔ | ✔ | ✔ |
| Min Max | ✔ | ✔ | ✔ |
| Backlight | ✔ | ✔ | ✔ |
| Auto Power Off | ✔ | ✔ | ✔ |
| Other | Flexible 1mA resolution | Flexible High current to 3000A | 50-1000V Insulation Test Temperature Low Pass Filter |
| Safety | CAT IV 600V | CAT IV 600V | CAT IV 600V |
Reliable, fast and accurate calibration
Martindale Electric’s calibration service gives you a reliable service and fast turnaround. Most instruments are calibrated in-house and ready within 3 – 5 days.
Find out more
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields