- Information
- Key spec
- Comparison
- Accessories
The CM100 True RMS current meter is fitted with a highly flexible current sensor, 8.5mm in diameter, ideal for measurements of difficult conductor sizes and shapes in hard-to-reach areas where conventional clamps won’t reach.
The TRMS capability ensures accurate and reliable AC current measurement for distorted waveforms caused by today’s power electronics and non-linear loads.
Measurements are accurate and reliable, with 3 ranges up to 3000A AC and a resolution of 10mA in the 30A range. The lightweight, flexible sensor head will accommodate conductors up to 160mm in diameter and can be threaded through small apertures.
True RMS Measurement
160mm maximum conductor size
3 ranges from 30.00A to 3000A AC
CAT IV 600V safety rating
AC Current
30.00A/300.0A/3000A
Accuracy
± 3.0% ± 5 dgt (45Hz to 500Hz)
Flexible sensor length
458mm
Flexible sensor diameter
8.5mm
Max conductor
160mm diam.
Display cable length
1.8m
Sampling rate
2/sec.
Features
Low battery indication, Auto power off/disable
Complies with
BS EN 61010-1 BS EN 61010-2-032 Class II Double Insulation 600V CAT IV EMC BS EN 61326-1
Includes
2 x 1.5V AAA alkaline batteries and manual
Warranty
2 Years
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162186790
| CM95 | CM100 | CMi210 | |
|---|---|---|---|
| AC Current | ✔ | ✔ | ✔ |
| DC Current | ✔ | ||
| AC/DC Volts | ✔ | ||
| Ohms | ✔ | ||
| Frequency | ✔ | ||
| Capacitance | ✔ | ||
| Non-contact Voltage Detector | |||
| Auto ranging | ✔ | ||
| Max Conductor Size | 85mm Ø | 160mm Ø | 55mm Ø 70x18mm |
| True RMS | ✔ | ✔ | ✔ |
| Min Max | ✔ | ✔ | ✔ |
| Backlight | ✔ | ✔ | ✔ |
| Auto Power Off | ✔ | ✔ | ✔ |
| Other | Flexible 1mA resolution | Flexible High current to 3000A | 50-1000V Insulation Test Temperature Low Pass Filter |
| Safety | CAT IV 600V | CAT IV 600V | CAT IV 600V |
Reliable, fast and accurate calibration
Martindale Electric’s calibration service gives you a reliable service and fast turnaround. Most instruments are calibrated in-house and ready within 3 – 5 days.
Find out more
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields