- Information
- Key spec
- Comparison
- Accessories
The Drummond G Clamp kits make connecting to bus bars straightforward. The clamp-on design eliminates the need to drill bus bars and makes for a much safer, reliable connection via a standard 4 mm socket. The G Clamp can be tightened by hand when wearing PPE gloves, eliminating the need to use tools in the bus bar chamber.
The GCK-F-KIT2 consists of a set of four fused G Clamps, black, brown and grey and a blue unfused unit for the neutral connection. Also included in the kit are 4m heavy duty colour coded CATIV test leads. The leads are terminated with 45-degree 4mm safety plugs at both ends.
Easy bus bar connection
Robust and easy to use
CAT IV test leads included
3 fused clamps + 1 unfused for neutral
Applied electrical contact force
40N +/- 5N
Maximum working voltage
Maximum working voltage
Maximum working current
10A
Length behind bus bar
12mm
Length in front of bus bar
Length in front of bus bar
Height above top of bus bar
14mm
Width
50mm for locking ring nut
Clearance in front of bus bar
Required to withdraw fuse holder 75mm
Materials
Nylon 66, reinforced with glass fibre
KIT2 includes
As Kit 1 plus 4m CATiV Lead Set
Full product specification can be found in the product manual or by contacting our team here
EAN: 5036162187483
Added to basket
Technical support
If you have questions related to Martindale products, please check our FAQ sections on our product pages, where the most common enquiries are answered.
Should you require further help please do not hesitate to contact the Martindale support team using the telephone number or email address below or complete the online form.
"*" indicates required fields