Martindale Electric Company Ltd
Trusted by Professionals
Martindale Electric on Facebook Martindale Electric on Twitter Martindale Electric on Linked In Martindale on YouTube
general image
Latest Articles & Blogs 

All Topics
 Cable Detection
 Clamp Meters
 Continuity Testing
 Earth Resistance Testing
 Environmental Testers
 Fuse Finders
 Installation Testing
 PAT Testing
 Phase Rotation
 Safety First
 Socket Testing
 Thermal Cameras & Thermometers
 Voltage Testing & Safe Isolation
 Frequently Asked Questions

 Search Our Articles  
general image

Choosing the right socket tester

general image
Choosing the right socket tester
general image

All socket testers check that the earth, live and neutral are the right way round (called polarity testing). Some offer added features – they may include a buzzer in addition to LEDs to indicate a good socket or they may show a combination of indicators to identify which particular fault type is present.

There is one fault that a socket tester and indeed no other piece of equipment can easily find – the swapping of the Earth and Neutral wires. This is because the earth and neutral are common at the substation, (if not closer), so electrically they are indistinguishable.

When selecting a socket tester it’s important to understand the different types available and their capabilities and limitations.

Socket Tester Categories

There are 3 main categories of socket testers, simple, advanced and professional, summarised in the following table. The key differentiator is in the ability to measure and display either ranges or numerical values for earth fault loop impedance.

Simple (CP501,BZ101)
Advanced (EZ150)
Professional (EZ2500)
Indicate functional socket
Detect line / neutral reversal
Detect presence of earth
Display range of earth loop impedance values
Display the numerical value of earth loop impedance

All socket testers will show the absence of an Earth; the Martindale EZ150 will show you how good your earth is and the EZ2500 will give you numerical values for certification and reporting.

This differentiation is important as some simple socket testers on the market have been seen to show an earth as good even when the impedance is as high as 500kΩ. As 0.5MΩ (500 kΩ) is normally considered a good insulation level, it’s clear that in this case the “protective” earth will not protect.

Socket Testers

A reliable earth loop impedance measurement is important to ensure that the over current protection devices achieve a fast enough disconnection time to avoid electrocution. In the case of an earth fault, loop impedance values must be less than those specified in the BS7671 Wiring Regulations Amendment 3:2015. Earth loop values higher than a few ohms can cause problems with disconnection times and therefore socket testers capable of indicating earth loop impedance values in this range reveal a lot more about the electrical safety of the installation than just an LED fault indicator. The Martindale EZ150 and EZ2500 have this capability built-in.

17th Edition Testing and Verification

It’s important to appreciate that socket testers are not an alternative to the full verification of wiring installations. However as a first line indicator to identify potentially unsafe installations and wiring faults, socket testers offer a fast and effective solution when properly specified. They can also be particularly useful as a service tool in identifying potentially unsafe conditions prior to carrying out work on existing installations and appliances. For more information on the use of socket testers including their benefits and limitations, see the application notes.

For information on professional loop testers and multifunction testers suitable for carrying out all the tests needed to verify the safety of domestic, commercial and industrial wiring installations according to Amendment 3 of the 17th Edition Wiring Regulations, see our ET4000/4500 multifunction installation testers.

This article was published on Tuesday 25 July, 2017.
general image
Author: Paul Wilson © Martindale Electric Co Ltd - 2018 - All Rights Reserved
Paul Wilson
general image
general image
Metrohm - a Martindale Brand
Drummond - a Martindale Brand
Luckins Logo - Martindale is listed in Luckins Live Martindale Electric Co Ltd, Metrohm House, Imperial Park, Imperial Way, Watford, Hertfordshire, WD24 4PP
Company Registration No: 3387451. © Martindale Electric Co Ltd 1997 - 2018, all rights reserved.
T: +44 (0) 1923 441 717   F: +44 (0) 1923 446 900   E:
E. & O.E. Privacy Notice | Terms & Conditions | Contact Us