The Martindale Micropat 'n' Go PAT Tester is a complete PAT testing package. The kit is supplied with barcode scanner, IEC & Extension lead tester, MPAT Suite PAT software and labels.

This is one of the most cost effective downloading PAT packages on the market and is ideal for users who are wanting to start PAT testing with a computerised system.

The complete kit is supplied with the Martindale MicroPAT Plus, LTDV Extension Lead Tester, MPAT Suite software, download lead, barcoded PASS labels, CCD Barcode Scanner, 100 FAIL Labels and instruction manuals.

Martindale MicroPAT Plus Specification

Earth Bond Test

Test Currents: 25A AC, +/- 100mA DC (IT Safe)

Display Range: 0.00Ω - 1.99Ω

Insulation Resistance

Test Voltage: 500V DC

Display Range: 0 - 19.9MΩ

Run Test

Display Range: 0 - 3.1kVA

Usable Range: 0 - 13.0A

Earth Leakage Test

Range: 0 - 6mA

Flash Test

Test Voltage: Class I - 1.5kV AC; Class II - 3.0kV AC

Display Range: 0 - 3.0mA AC

Martindale Extension Lead Tester Specification

Applied Test Voltage

110V +/- 10% or 240V +/- 10%, 50 / 60 Hz

Installation (IEC1010)

CAT II 300V

Leads

240V BS 1363 to IEC line socket, 110V BS 4343 to IEC line socket

Pollution (IEC1010)

CAT II

Operating Temperature

0°C to +35°C

Storage Temperature

-10°C to 50°C

Housing

ABS

Dimensions

141 x 82 x 51mm

                                                                     

Martindale MicroPAT Plus Specification Sheet        Martindale LTDV Specification Sheet

                                                       

Martindale MicroPAT Plus Instruction Manual      Martindale LTDV Instruction Manual

How do I test 3 Phase appliances?
You need to use our 3-Phase adaptor leads that allow a single phase PAT tester to carry out safety tests on 3-Phase appliances. Only the basic tests can be performed, i.e. earth bond and insulation tests. Obviously it is not possible to carry out the RUN tests with a single phase PAT tester.

The adaptors you require are as follows:

Part number MARTL151: 16A, 4 Pin adaptor

Part number MARTL152: 16A, 5 Pin adaptor

Part number MARTL153: 32A, 4 Pin adaptor

Part number MARTL154: 32A, 5 Pin adaptor

It is also advisable to purchase a copy of the IEE Code of Practice, if you haven't already done so.

Why won't my barcode scanner work with my MicroPAT?
The most common cause for barcode scanners not working with the MicroPAT are either the scanner has not been configured correctly, or the the MicroPAT baud rate has been set differently to the scanner.

Early models of the MicroPAT only had a 1200 baud rate, whereas with the later model MicroPATs you can cycle from 1200 to 9600 by pressing first the PRINT button then the RATE button.

NOTE: If the MicroPAT is the type badged up for Metrotest then it will need to be returned to us for a firmware change before it will work.

Please click the links below to download the application notes in pdf format.

Common PAT testing errors

How to choose the right PAT

4 Key ways to build your PAT business

Where can I get my instruments calibrated?