The Martindale LP2000 is a high current earth loop tester, suitable for use on 240V systems. The LP2000 carries out P-E and P-N loop tests, displaying PSCC readings up to 19.99kA. An additional wander lead is also supplied for testing of bonded metalwork.

The Martindale LP2000 is supplied with mains test lead, wander lead for bonded metalwork, batteries, instruction manual and soft carry case.

Supply Voltage

200 - 260V rms, 50 / 60Hz

Test Current

24A, rms for two half cycles at 240V

Loop Range

0 to 15Ω nominal in steps of 0.01Ω

15 to 199.9Ω in steps of 0.1Ω

Accuracy

+/- 2% reading, +/- 2 digits

Temperature Coefficient

+/- 0.1% / °C

lpsc Range

0 to 19.99kA in steps of 0.01kA

General Specifications

Fuse: 5A, HBC, Anti-Surge Ceramic

Transient Protection: VDR at input

Thermal Protection: Electronic Delay

Overvoltage: CAT III

Dimensions: 190 x 90 x 54mm

Weight: 400g approx

Supplied with soft carry case, mains test lead (TL205), green wander lead (TL61) & manual

Martindale LP2000 Specification Sheet

Martindale LP2000 Instruction Manual

Please click the links below to download the application notes in pdf format.

Building Regulations in addition to Part P

Where can I get my instruments calibrated?