HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
Trusted by Professionals
Search:
  
Martindale Electric on Facebook Martindale Electric on Twitter Martindale Electric on Linked In Martindale on Google+ Martindale on YouTube

Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory

Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
general image
Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
Martindale HPAT600 PAT Tester with User Adjustable Pass Limits and Memory
general image
Martindale Part No: MARHPAT600

The HPAT600 is an easy to use battery powered, hand held PAT tester that is ideal for testing all types of portable appliances. The tester is supplied with rechargeable batteries for low running costs and a mains and in-car charger for convenience. Whilst recharging, the HPAT can still be operated from the mains supply ensuring maximum productivity at all times.

It has a fast automatic one button test sequence or a simple to operate manual mode useful for diagnostics and can be used for testing both 240V and 110V appliances with the optional TL157 adaptor lead.

In automatic mode, the HPAT600 will routinely run through a selected test sequence without any further user interaction unless a failure is encountered. In manual mode, a connection diagram for the selected test type is shown on the display and each step of a test requires user confirmation by a press of the OK button.

The user can select either the standard 500V insulation test or a 250V option which is required for testing appliances with surge protected circuits. The pass levels can also be adjusted which is particularly useful for testing appliances with long power cords or long extension leads. The HPAT600 stores test data for up to 200 appliances for on-screen recall, making it easy to review earlier results when on-site. This function is not for downloading to a PC. In addition to the mandatory safety tests, the HPAT600 can also be used to carry out a simulated load test to check the appliance is in working order and to confirm the integrity of the fuse.

A comprehensive range of optional adaptor leads are available enabling 110V appliance testing and testing of equipment terminated with 3 phase plugs.

  • Easy to use automatic and manual testing
  • Displays measured values with clear PASS/FAIL indication
  • Class I, Class II & power lead tests
  • I.T. safe 200mA DC earth bond test with two pass levels
  • 250V insulation test option for surge protected devices & sensitive IT equipment
  • Test both 240V and 110V appliances
  • Rechargeable with both mains and in-car chargers included
  • Memory with on-screen recall for 200 sets of results
  • FREE_VC.jpg 


    Earth Bond Test (IT Safe)
    • Test Current: 200mA DC
    • Test Voltage: 4V DC
    • Range: 0 - 19.99Ω
    • Resolution: 0.01Ω
    • Default Pass Value: 0.1Ω
    • User Selectable Pass Value: 0.1Ω to 0.9Ω in 0.1Ω steps

    Insulation Resistance

    • Test Voltage:
      500V: >500V DC at 1mA
      250V: >250V DC at 1mA
    • Default Pass Value: Class I - 1MΩ, Class II - 2MΩ
    • User Selectable Pass Value: 0.3MΩ to 1MΩ in 0.1Ω steps, or 1MΩ to 10MΩ in 1MΩ steps

    IEC & Extension Lead Test

    • Earth Continuity: 200mA DC
    • Insulation Test: 500V DC
    • Wiring Test: Live, Neutral Continuity& Polarity
    • Earth Bond Default Pass Value: 0.1Ω
    • Earth Bond User Selectable Pass Value: 0.1Ω to 0.9Ω in 0.1Ω steps
    • Insulation Resistance Default Pass Value: 1MΩ
    • Insulation Resistance User Selectable Pass Value: 0.3MΩ to 1MΩ in 0.1Ω steps, or 1MΩ to 10MΩ in 1MΩ steps

    Fuse Test

    • Test Voltage: 4V DC
    • Test Current: 200mA DC
    • Pass Level: >2mA

    Simulated Load Test

    • Test Voltage: 4V DC
    • Test Current: 200mA DC
    • Accuracy: +/- (5% reading + 2 digits, referenced up to 230V)

    How do I test 3 Phase appliances?
    You need to use our 3-Phase adaptor leads that allow a single phase PAT tester to carry out safety tests on 3-Phase appliances. Only the basic tests can be performed, i.e. earth bond and insulation tests. Obviously it is not possible to carry out the RUN tests with a single phase PAT tester.

    The adaptors you require are as follows:

  • Part number MARTL151: 16A, 4 Pin adaptor
  • Part number MARTL152: 16A, 5 Pin adaptor
  • Part number MARTL153: 32A, 4 Pin adaptor
  • Part number MARTL154: 32A, 5 Pin adaptor
  • It is also advisable to purchase a copy of the IEE Code of Practice, if you haven't already done so.


    Please click the links below to download the application notes in pdf format.

    Common PAT testing errors

    How to choose the right PAT

    Where can I get my instruments calibrated?

    Print    Bookmark    Manual     Datasheet   
    general image
    general image
    Metrohm - a Martindale Brand
    Drummond - a Martindale Brand
    Luckins Logo - Martindale is listed in Luckins Live Martindale Electric Co Ltd, Metrohm House, Imperial Park, Imperial Way, Watford, Hertfordshire, WD24 4PP
    Company Registration No: 3387451. © Martindale Electric Co Ltd 1997 - 2017, all rights reserved.
    T: +44 (0) 1923 441 717   F: +44 (0) 1923 446 900   E: sales@martindale-electric.co.uk
    E. & O.E. Privacy Notice | Terms & Conditions | Contact Us