Martindale EPAT1600 PAT Tester
Martindale EPAT1600 PAT Tester
Trusted by Professionals
Search:
  
Martindale Electric on Facebook Martindale Electric on Twitter Martindale Electric on Linked In Martindale on Google+ Martindale on YouTube

Martindale EPAT1600 Dual Voltage Manual PAT Tester

Martindale EPAT1600 Dual Voltage Manual PAT Tester
general image
Martindale EPAT1600 Dual Voltage Manual PAT Tester
Martindale EPAT1600 Dual Voltage Manual PAT Tester
general image
Martindale Part No: MAREPAT1600

The EPAT1600 is a simple one button, one test manual PAT tester which will test all 240V & 110V portable appliances. The EPAT2100 is capable of full high current bond testing at 25A and 8A or can be set to a low current 200mA soft test for safe testing of sensitive IT equipment. There are no complicated menus, just a single rocker switch for selecting test current and large separate buttons bond and insulation testing.

The Easypat has a built-in lead tester for IEC power leads and includes the EX332 adaptor for fast testing of 230V mains extension leads and identification of extension lead wiring faults including phase/neutral reversal, phase open circuit and phase / neutral short.

Simple one button, one test operation
Fast and easy Class I & Class II appliance testing
No complicated menus or settings
Tests both 240V and 110V appliances from 240v supply
High and low current earth bond tests at 25A, 8A and 200mA
Insulation test at 500V
Built-in lead tester
Hard case with storage and removable top

FREE_VC.jpg 


Earth Bond Test
  • Test Currents: 8A AC, 25A AC, +/- 200mA DC (IT Safe)
  • Display Range: 0.00Ω - 1.99Ω

Insulation Resistance

  • Test Voltage: 500V DC
  • Display Range: 0 - 19.9MΩ

Fuse Test

  • Test Voltage: 6V AC Nominal
  • Over range Threshold: 10kΩ nominal
  • Zero Range Threshold: 800kΩ nominal

IEC & Extension Lead Test

  • Earth Continuity: 8A AC, 25A AC
  • Insulation Test: 500V DC
  • Wiring Test: Live, Neutral Continuity & Polarity

How do I test 3 Phase appliances?
You need to use our 3-Phase adaptor leads that allow a single phase PAT tester to carry out safety tests on 3-Phase appliances. Only the basic tests can be performed, i.e. earth bond and insulation tests. Obviously it is not possible to carry out the RUN tests with a single phase PAT tester.

The adaptors you require are as follows:

  • Part number MARTL151: 16A, 4 Pin adaptor
  • Part number MARTL152: 16A, 5 Pin adaptor
  • Part number MARTL153: 32A, 4 Pin adaptor
  • Part number MARTL154: 32A, 5 Pin adaptor
  • It is also advisable to purchase a copy of the IEE Code of Practice, if you haven't already done so.

    Print    Bookmark    Manual     Datasheet   
    general image
    general image
    Metrohm - a Martindale Brand
    Drummond - a Martindale Brand
    Luckins Logo - Martindale is listed in Luckins Live Martindale Electric Co Ltd, Metrohm House, Imperial Park, Imperial Way, Watford, Hertfordshire, WD24 4PP
    Company Registration No: 3387451. © Martindale Electric Co Ltd 1997 - 2017, all rights reserved.
    T: +44 (0) 1923 441 717   F: +44 (0) 1923 446 900   E: sales@martindale-electric.co.uk
    E. & O.E. Privacy Notice | Terms & Conditions | Contact Us