The Martindale CT60 is a general purpose clamp adaptor, capable of reading up to 600A AC or DC. This clamp adaptor can be used with any multimeter that has a 0 - 600mV AC / DC range.

The flying lead, terminated with 4mm banana plugs, can be fitted into the voltage and common inputs of a multimeter, having an input resistance of 10kΩ or greater.

The CT60 clamp adaptor converts AC or DC current to AC or DC voltages at the rate of 1mV per amp, allowing a direct amp reading from the multimeter.

Each CT60 is supplied with battery and instruction manual.

DC Current

0 - 600A +/- 2%, +/- 2A

AC Current

0 - 600A, 50Hz - 400Hz

AC Current Accuracy

0 - 400A: +/- 2% reading + 2A

400 - 500A: +/- 3% reading +2A

500 - 600A: +/- 6% reading +1A

Output

0 - 600mV for 0 - 600A

General Specifications

Operating Environment: 0°C to 50°C at <70% RH

Zero Adjust

Low Battery Indication

Conductor Size: 30mm max

Dimensions: 178 x 70 x 33mm

Weight: 290g approx

Suitable for all standard multimeters with 4mm sockets and mV range

Supplied with battery & instruction manual

Martindale CT60 Specification Sheet

Martindale CT60 Instruction Manual